Model Online Guide

Many people think that building a plastic model is difficult, however, these kits are specially designed to be easy to assemble and user-friendly, even for beginners. Assembly, painting, applying markings and weathering, the fun of modeling is limitless. Let's take a little look at the art of modeling!

Step 1: Assembly

Assembly is one of the most fun parts of modeling. As you combine each individual part together you gradually begin to see the finished result appear before your eyes. Just cut the parts off the sprues in the order outlined in the instructions and glue them together. It's that simple!

Step 1: Gluing

Glue parts together using the correct Cement recommend by Hobbies R 4 U. Apply a small amount of cement to one of the gluing surfaces and press the parts together. Leave for a while until cement has completely hardened.

Step 1: Painting

Spray painting is recommended for large parts such as car bodies. It is a lot quicker and will give you a much better finish.  Avoid spray painting on windy days or on rainy/cloudy days. Humidity in the air will take off the shine.  Shake the can thoroughly so that all the colors mix evenly.  Hold spray can about 12 inches away from object. Spray on a thin layer of paint. Spraying too much paint will cause the paint to run, resulting in a poor finish.  Spray on each new layer after the previous layer has dried. Steady and patient work will produce beautiful results.  Allow paint to dry for at least 24 hours. Protect the model from dust while drying.

And if you are ready to purchase your hobby items Hobbies R 4 U can help!  We can give you the convenience of purchasing locally and helping you with all your hobby needs!